Economical Integrating Sound
Level Meter
|
Specification
of Sound Level Meter, Type 6226
|
|
|
|
|
|
|
Applicable Standard |
JIS 1502. IEC 651.804 Type 2 |
|
Measuring Range |
28 to 130dB (A), 33 to 130dB (C), 38 to
130dB (F) |
|
Measuring Frequency |
Range: 20 Hz to 8 KHz |
|
Microphone |
7052N (1/2 Electric condenser microphone) |
|
Level Range Control |
10dB 6 steps |
|
Linearity Range |
100dB |
|
Response |
Fast, Slow, Impulse |
|
Frequency Weighting |
A, C, Flat |
|
Measurement Parameters |
Lp |
: |
Sound pressure level |
Leq |
: |
Equivalent continuous A-weighted sound pressure
level |
Le |
: |
Sound exposure level |
Lmax |
: |
Maximum sound level |
Lmin |
: |
Minimum sound level |
Lx |
: |
Percentile level (5 values of free selection) |
|
|
Response Time For Constant Input Signal |
1, 3, 5, 10 sec., 1, 5, 10, 15, 30 min.,
1, 8, 24 hours Manual (Max. 199h 59m 59s) |
|
Sampling Time |
20.8 u
s (Leq), 10ms (Lmax, Lmin) |
|
Lx Sampling Time |
100ms |
|
Display |
|
|
Type
|
Liquid crystal and Back light (128x64 points) |
|
Digital
|
4 digits, Display Period : 1s |
|
Bar Warning
|
Display Period : 0.1s |
|
Warning
|
Over : + 10dB from upper limited scale
Under : - 0.6dB from lower limited scale |
|
Battery
|
4 steps display |
|
Memory |
Memorize the Sound pressure level or the
Operation level (Approx. 15,000 data) |
|
Data |
Built-in (year/month/day/hour:minute:second) |
|
Pause |
pause/data clear |
|
Calibration |
Electric calibration with internal oscillator
(1 kHz Sine wave) |
|
AC Output |
1Vrms for full scale. Output impedance:
600 Ohm, resistance: more than 10 kOhm |
|
DC Output |
2.5V for full scale, 0.25V/10dB
Output impedance: 50 Ohm, resistance: more than 10 kOhm |
|
I/O Terminal |
Interface : RS-232C Data : 8 bits, Stop
2 bits, Parity : not, Baud rate : 4800. 9600, 19200, bps (direct
output to printer, control and output data to computer) |
|
Battery, Type
|
Four 1.5V Alkaline cells IEC type LR6,
or Optional AC Adapter |
|
Battery, Life
|
Alkaline dry cell: Approx. 24 hours.
Manganese dry cell: Approx. 11 hours.
Approx. 1/3 of life when switch on back light.
|
|
|
Temperature : - 10oC ~ 50oC
Humidity : 30% to 90% (not condensing) |
|
Dimensions |
85(W) x 284(H) x 48(D) mm |
|
Weight |
Approx. 370g |
|
Option accessories |
AC Adapter(AC-1026), Tripod (NA-0333),
Extension cable (2m or 5m / BC-0046)
BNC Pin cord(BC-0071), Piston phone (Type 2124) |